Keralux® degreaser spray
Removes grease stains from almost all types of leather.
Especially on full-aniline and sanded leathers (nubuck), skin fat can leave black stains on arm- and headrests. The Keralux® degreaser spray starts as a spray and forms a powder after drying that will absorb the grease stain.
Shake the can well before use. Spray the greasy spots at a distance of approx. 15 centimeters (+/- 6 inches). Always treat a larger area than the stain itself and allow it to fan out evenly around the stain. Then let the spray work well until it is completely dry, this can take 1 to 2 hours. The spray turns into a powder that can easily be absorbed with the help of a vacuum cleaner (please use the appropriate furniture attachment). Then rinse from seam to seam with the Keralux® intensive cleaner.
When advised or with grease stains.
36 months after production date.
Keralux® degreaser spray (200ml) - aerosol UN1950
Always try the Puratex® degreaser spray first in a discrete place. In the case of discolouration, please contact us via the contact page.
This product cannot be sent by airfright ouside the EU.
New models vacuum claenars (without bag) may not be used for cleaning the fine powder of the degreaser. Please check your the specifications of your vacuum cleaner.
Not suitable for:
For oiled or waxed leather types (saddle) limited use. The Keralux® degreaser spray makes no distinction between an unwanted grease stain and the applied wax finish of the leather. The degreaser changes the optics and the touch of the leather different. If you have any questions or doubts, please contact us via the contact page.
Tip: The result is often better if the same spot is thinly sprayed a couple of times. Make sure to check the surface of the leather beforehand, in case of excessive use a nubuck effect may occur. To eliminate the difference in gloss, the leather can be rubbed with a dry (lint-free) cloth after treatment. Colour differences can be updated with a Keralux® colour repair set.